This is a black plastic bezel, custom made to mate with the silicon rubber pads. Suitable for 2x2 button pad.

This is a translucent silicon rubber button pad with 4 buttons. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button.

This product is for the white rubber only. PCB and bezel are separate items.

This a simple breakout board for the 2x2 button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB.

This is a translucent silicon rubber button pad with 16 buttons. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. 16 button pad can be split up into four 2x2 button pads. 

This product is for the white rubber only. PCB and bezel are separate items.

This is a simple breakout board for the 4x4 button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB.

Common anode with 5x7 or 8x8 leds. Three different Led sizes: 1.87mm, 3.7mm and 5mm. Color choices: Red, green and blue.

Contains 64 LEDs each in red, green, and blue. 192 LEDs total. Common anode. 5 mm LED dot diameter. Diffused lenses for good color blending.

RGB Led with common cathode. One pin for each color and a common cathode. Cathode is the longest pin. Use this one LED for three status indicators or PWM all three and get mixed colors!